La regina di tutte le splitboard, provata per voi
The Solution is the ultimate all-terrain splitboard and delivers unrivaled backcountry performance in any snow condition. Featuring a directional freeride shape, directional rocker profile and a mid-stiff flex, the Solution is playful in soft snow, yet confidence inspiring on steep, hard snow.
The updated Inner/Outer Traction Tech 2.0 edges are thinner on the inside for weight savings while keeping you locked in and gliding fast going up or down. The Solution also features the Boltless Bridge which eliminates base hardware and Karakoram Ultra Clips for unmatched torsional board lock.
a hybrid rocker/camber flex pattern defined by more tip rocker then tail rocker and camber between the bindings. The rockered tip floats the board’s nose and improves maneuverability while the camber underfoot provides edge hold and response. A slightly rockered tail maintains the power and stability of a traditional board but helps keep the tail catch-free initiating turns and landing switch.
“How a board glides in powder, crust, corn or any snow more than an inch deep, is dictated by it’s front contact point and just past it. Next time you are in soft snow watch how much snow comes over the corner of the nose near the contact point. The billowing snow coming out from behind the tip means you are plowing through it which is obviously slowing you down. By adding a blunt nose you get the float benefits of a much longer nose without the ‘snow plow’ rounded tip and it’s extra swing weight.” – Jeremy Jones
triple-density full wood core designed to be ultralight, uber responsive and super tough. Hardwood stringers positioned at the edges deliver supreme durability.
New Jones exclusive sustainable stringer made with 100% natural fibers. Composite Flax and Basalt stringer helps transfer power to the edges, improves torsional response and absorbs board chatter.
All Jones boards are now built with bio-based, renewable epoxy instead of petroleum based epoxy. The raw materials used to make Super Sap Bio-Resin are coproducts or waste products of other plantbased industrial processes. Producing Super Sap requires 33% less greenhouse gas emissions than conventional epoxy.
made from ultra-high molecular weight polyethylene (uhmw-pe) and carbon. This ultra-fast base is easy to repair thanks to the uhmw-pe.
all jones snowboards are factory de-tuned at the tip and tail so you can go right from the shop to the mountain.
Bio-plastic topsheet made from Castor beans featuring a subtle texture for added durability. This eco-material is ultralight, chip/scratch resistant and water/snow repellent (snow sticks less to topsheet)
multi-axis, stitched fiberglass laminate that ofers a precise and responsive ride in any terrain or snow conditions.
Stainless steel plates are embedded into the nose and tail for improved board tip durability.
all jones boards are made with oversized recycled steel edges for added durability and improved production sustainability.
Advancements in ski edge durability allow us to use thinner edges on splitboard inside edges (and Project X outside edges) to save weight. Outside edges are 2mm, inside edges are 1.5mm.
New rounded sidewall finish that improves board durability by protecting topsheet from chipping. Available on all splitboards and surf series models.
Built-in climbing skin tension system using pre-cut notch that eliminates the need for a traditional skin tail clip.
The Bolt-less Bridge eliminates split clip attachment hardware from the base of the board by re-profiling the wood core at the clips. The wood core under the clips is thicker providing better torsional stifness and a more powerful connection at the split clips.
ULTRA clips are the strongest, lowest profilesplitboard clips in the world. They deliver unmatched compression between board halves and they are adjustable so yo can maintain even compression as your splitboard ages.